ANTIMATTER M6C06 IPE V3

Home/ANTIMATTER MOTORS/ANTIMATTER M6C06 IPE V3

ANTIMATTER M6C06 IPE V3

$95.00

SKU: MAD Antimatter M6C06 IPE V3 Drone Motor

Antimatter M6C06 is designed to carry payload of 1.4-2.5kg, supports 6S, 8S, 12S voltage.

INDUSTRY PROFESSIONAL EDITION

  • Upgrade M6C06 IPE V3 is improved to get higher reliability and stability for long range flight. It also maintains the excellent properties and characteristics of the previous generation and enhances motor safety and service life that fully meets the demanding requirements of various industries.
  • Higher protection level IP45, best for harsh environment

KV Option:

140KV 220KV 320KV

M6C06 IPE V3

VERSATILE, EFFICIENT AND RELIABLE

The M6C06 IPE V3 introduces design improvements and optimizations of assembly parts to increase reliability and stability over its predecessor. It also maintains the excellent properties and characteristics of the previous generation and enhances motor safety and service life that fully meets the demanding requirements of various industries.
V3 revision can bear heavier task loads and provide more power redundancy to improve the wind resistance and maneuverability of the platform.

Powertrain maximum pulling force up to 5.6/rotor (48V, sea level)
Recommended takeoff weight 1.4-2.5kg/rotor
Motor weight only 178g

VERSATILE, EFFICIENT AND RELIABLE

The M6 series has a brand new iron core design. Several months of simulation and real practical tests lead engineers to the optimal solution, obtained after repeated comparison of series of various parameters of the iron core. The lightweight design of the iron core (12% lighter than the motor of the same level) thanks to less inertia, produces greater thrust with extremely high efficiency.

COOL IN, HOT OUT

The internal upgrade of the MAD M6C06 V3 motor improves a centrifugal cooling fan design. The bottom and sides of the lower part are hollowed out, plus a heat dissipation matrix composed of 24 aluminum sheets at the bottom more effectively cools down the motor coils. Reduction of the motor temperature on the flight, especially in high temperature contitions, improves reliability of powertrain, extends operation time of the aircraft, and make the overall flight safer.

INGRESS PROTECTION IP45

The M6C06 V3 motor has been further optimized in structure and technology in order to meet the use environment of different users to ensure that it can respond calmly even in harsh environments. 1mm airflow vent holes in the upper and lower parts of the motor protects internals against access of debris ensuring efficient heat dissipation. The iron core adopts special anti-rust treatment along with coil high temperature epoxy coating process to providing super strong anti-rust and anti-corrosion ability.

DOUBLE SAFETY LOCK, SAFE FLIGHT

The MAD M6C06 V3 motor uses 6mm high strength steel shaft and double locking method (lock ring + shaft lock ring) to ensure safe operation of the motor. It easily supports high speed operation under conditions of continuous high power operation. Fly the way you want without worrying about the risk of loosening the rotor.

MORE LIFT, ALL PLATFORM TYPES READY

The recommended takeoff weight for the M6C08 V3 is 1400-2500 g/rotor and the maximum thrust up to 5368g/rotor, which allows the propulsion system to withstand greater loads and provides greater power redundancy, improving platform wind resistance and increasing efficiency and mobility. For best results 21-24 inch propeller is recommended. Whether it’s a traditional 4, 6, 8 motor platform, X8 coaxial setup or VTOL, they are all supported and compatible. The drive system can be optimized for customized requirements. 6-12S voltage range supported.

SUITABLE FOR VARIOUS TASKS

The M6C06 V3 motor has strict all weather protection, strong power and high performance. Multirotors are used in a variety of application environments such as aerial photography, emergency search and rescue, police law enforcement, fire rescue, power inspection, surveillance and more. The M6 series propulsion system provides the most stable and reliable propulsion even in bad wheather conditions for highend aerial platforms.

COMPATIBLE WITH VARIOUS PROPELLER TYPES

The M6C06 V3 motor (M6 series) supports different types of propellers available, bringing it closer to the real needs of users. Propeller mounting hole spacing allows integration with 21″- 24″ carbon fiber and composite propellers, also foldable. Reduction ring 6 to 4 mm included.

Our brand ANTIMATTER motors are defined as not “ordinary” in the multi-rotor motors field. We are proud to release

ANTIMATTER series motors (M6C06, M6C08, M6C10, M6C12) at the end of 2019. We spent one year to design and prove

which motors are the most efficient with 21-24in props. This is the magic! MAD Components in Poland brings to the table.

Interested to distribute MAD products?
Or need talor-made propulsion system solution for your specific demand?

Contact Us Now

(For Europe Market, please contact madeu@madcomponents.co directly.)
You’ll get fast reply within 24hrs

    You may also like…

    Go to Top